English
13
Operation
1
Dry
Return
Setting
Press Mode button several times until the Dry mode is selected.
●
The dry mode may not be available depending on the type of indoor unit.
*
2
On/Off
nu
K
Press On/Off button.
●
The Operation lamp (green) will illuminate and the system will start operating.
In Dry mode, the system maintains automatic temperature and fan speed control. Therefore, temperature
*
setpoint or fan speed settings are not available while the indoor unit is in the Dry mode.
3
Adjust Air Flow Direction from the main menu
●
(see page 19)
.
If the connected indoor unit model does not include oscillating louvers this function will not be available.
*
4
On/Off
nu
K
When the On/Off button is pressed again, the system will stop operating and
●
the operation lamp will turn off.
Note
To prevent water damage or system failure, do not immediately remove power from the indoor unit
●
following system operation. Wait at least
fi
ve minutes for the condensate pump to
fi
nishing draining
residual water from the unit.
Characteristic of Dry mode
The Dry mode dehumidifys the space at reduced cooling capacity to prevent the room temperature
from dropping to uncomfortable levels.
Setback
The Setback feature will maintain the space temperature in a speci
fi
c range during unoccupied periods.
Note
This function will temporarily start an indoor unit that was previously turned off by the user or turned off from a schedule event /
●
off timer.
This function must be enabled by the system installer.
●
01_EN_3P215731-9N.indd 13
01_EN_3P215731-9N.indd 13
11/8/2010 8:38:55 PM
11/8/2010 8:38:55 PM