manualshive.com logo in svg

Daikin UHA075B5, Catalogue/Engineering Data

Share
Download
Daikin UHA075B5 Catalogue/Engineering Data Download Page 2

1

Contents

Literature No.: ED-UHA-B5-V01

Supersedes: N/A

Note: 

 

Installation and maintenance are to be performed only by qualified personnel who are 

familiar with local codes and regulations, and experienced with this type of equipment.

Caution: 

Sharp edges and coil surfaces are a potential injury hazard. Avoid contact with them.

Warning: 

Moving machinery and electrical power hazard may cause severe personal injury or 

death. Disconnect and lock off power before servicing equipment.

Model Series.............................................................................................................................2
Nomenclature ...........................................................................................................................2
Features ...................................................................................................................................3

Specifications

 ...........................................................................................................................5

Dimensions ...............................................................................................................................8
Performance Data ....................................................................................................................9

Water Pressure Drop Curve

 .....................................................................................................11

Sound Data...............................................................................................................................12

Wiring Diagrams

 .......................................................................................................................13

Installation ................................................................................................................................17
Model Selection and Hydraulic Calculation ..............................................................................21
Hydraulic System Installation ...................................................................................................31

Commissioning and Operation

 .................................................................................................35

Maintenance .............................................................................................................................37
Control System Instruction .......................................................................................................39
Wired Controller Instruction ......................................................................................................42

Error Code and Trouble Shooting

 .............................................................................................46

Summary of Contents for UHA075B5


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands