5
E
ngl
ish
■
Outdoor Unit
■
Indoor Unit
1. Air filter
2. Titanium apatite photocatalytic
air-purifying filter:
• These filters are attached to the inside of
the air filters.
3. Air inlet
4. Front panel
5. Panel tab
6. Room temperature sensor:
• It senses the air temperature around the
unit.
7. INTELLIGENT EYE sensor:
(page 14.)
8. Display
9. Air outlet
10. Flaps (horizontal blades):
(page 12.)
11. Louvers (vertical blades):
• The louvers are inside of the air outlet.
(page 12.)
12. Model name plate
13. Indoor unit ON/OFF switch:
• Push this switch once to start operation.
Push once again to stop it.
• The operation mode refers to the following
table.
• This switch is useful when the remote
controller is missing.
14. OPERATION lamp (green)
15. TIMER lamp (yellow):
(page 20.)
16. INTELLIGENT EYE lamp (green):
(page 14.)
17. Signal receiver:
• It receives signals from the remote controller.
• When the unit receives a signal, you will
hear a beep sound.
• Operation start .......... beep-beep
• Settings changed....... beep
• Operation stop ........... long beep
■
Outdoor Unit
18. Air inlet (back and side)
19. Refrigerant piping and inter-unit wiring
20. Drain hose
21. Earth terminal:
• It is inside of this cover.
22. Air outlet
23. Outdoor temperature sensor (back)
24. Model name plate
19
20
21
22
18
24
23
• Appearance of the outdoor unit may differ from some models.
Model
Mode
Temperature
setting
Airflow
rate
COOLING
ONLY
COOL
22°C
AUTO
HEAT
PUMP
AUTO
25°C
AUTO
01_EN_3P248442-3.fm Page 5 Tuesday, September 8, 2009 1:54 PM
