![background image](http://html2.mh-extra.com/html/daikin/super-multi-nx-ftxg25jv1bw/super-multi-nx-ftxg25jv1bw_operation-manual_4700976006.webp)
Display
5
Name of Parts
Indoor Unit
Appearance of the indoor unit may differ.
•
Air inlet
Front panel
Air outlet
Louvers (vertical blades)
The louvers are inside of the air outlet.
•
Page 13
INTELLIGENT EYE
sensor
It detects the movements of
•
people and automatically
switches between normal
operation and energy saving
operation.
Page 16
Flaps (horizontal blades)
Page 13
INTELLIGENT EYE lamp
(green)
Page 16
Signal receiver and Indoor
unit ON/OFF switch
Signal receiver
It receives signals from the remote
•
controller.
When the unit receives a signal, you will
•
hear a beep sound.
Case
Sound type
Operation start
beep-beep
Setting changed
beep
Operation stop
long beep
Indoor unit ON/OFF switch
Press this switch once to start operation.
•
Press once again to stop it.
The operation mode refer to the following table.
•
Mode
Temperature setting
Air
fl
ow rate
AUTO
25°C
AUTO
This switch is useful when the remote controller is
•
missing.
TIMER lamp
When operation by timer has been set, the multi-monitor lamp
•
periodically changes to orange. After lighting orange for about
5 seconds, it returns to the colour of the operation mode.
The multi-monitor lamp will turn orange on and off in cyclic
manner while the air conditioner is not in operation.
TIMER lamp colour
TIMER lamp colour : For COOL
Orange
Blue
3 min.
5 sec.
5 sec.
2 sec.
2 sec.
2 sec.
Green
Orange
DRY :
COOL : Blue
Orange
HEAT : Red
Orange
FAN : White
Orange
Stop : Off
Orange
Model name
plate
Panel tab
Room temperature
sensor
It detects the air temperature
•
around the unit.
Multi-monitor lamp and
TIMER lamp
Multi-monitor lamp
The lamp colour changes according to
•
the operation.
Operation
Multi-monitor lamp
AUTO
Red/Blue
DRY
Green
COOL
Blue
HEAT
Red
FAN
White
TIMER
Orange
01_EN_3P255639-2A.indd 5
01_EN_3P255639-2A.indd 5
2/16/2011 2:43:02 PM
2/16/2011 2:43:02 PM