background image

This product is designed and manufactured free from defects in material and workmanship under the normal use and 
maintenance. Installation, operation, maintenance and service shall follow or Local Codes and related manuals from us. 
Otherwise, damage to equipment or property even injury to people may occur.

Installer

: Read this instruction manual before installation. Remember to complete in full the warranty cardon the back 

of this manual warranty card.

User

: Keep this instruction manual for future maintenance and service use.

Servicer

: Use this instruction manual for service reference.

Literature Part No.: LIT-WMMS-(59)2-EC-DC IVTR-II-20131130

For Ceiling Cassette Styles-59, 12 to 24K Btu/h Cooling and Heat Pump

This Manual is Subject to Change to Reflect Our Continuous Effort for Engineering Improvement without Prior Notice.

YMGI is the Trademark and Property of YMGI Group.  Copyright of  YMGI Group 2013.

YMGI, Engineered HVAC & R Products for Maximum Green World and Better Tomorrow

YMGI Group

POB 1559

O'Fallon, MO 63366, USA

Tel: (866)833-3138  Fax: (866)377-3355

Web Site: www.ymgigroup.com

Email: [email protected]

WMMS-24EC-V2B(59) (2)

LITERATURE: LIT-WMMS-(59) (2)-EC-DC IVTR-II-20131130

INSTALLER'S INSTRUCTION & USER'S MANUAL

DC INVERTER MULTIPLE ZONE (59)2

SYMPHONY CHOIR

INDOOR UNIT-CEILING CASSETTE (EC)

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

WMMS-12EC-V2B(59) (2)
WMMS-18EC-V2B(59) (2)

Summary of Contents for WMMS-12EC-V2B
























Reviews: