![background image](http://html2.mh-extra.com/html/daikin/sibe07-618_d/sibe07-618_d_service-manual-field_5691000060.webp)
Operation Manual
SiBE07-618_D
50
Operation Manual
15
1.Use as an energy-saving mode.
2.Use as a favorite mode.
•
NOTE
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air flow
rate which you use the most? HOME LEAVE operation is a function that allows you to record your
favorite set temperature and air flow rate. You can start your favorite operation mode simply by pressing
the HOME LEAVE button on the remote control. This function is convenient in the following situations.
Set the temperature 2-3˚C higher (cooling) or lower (heating) than normal. Setting the fan strength to the lowest
setting allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
When you go out, push the “HOME LEAVE
Operation” button, and the air conditioner
will adjust capacity to reach the preset
temperature for HOME LEAVE Operation.
Before bed...
Set the unit to HOME LEAVE
Operation before leaving the living
room when going to bed.
When you return, you will be
welcomed by a comfortably
air conditioned room.
The unit will maintain the
temperature in the room at a
comfortable level while you sleep.
Push the “HOME LEAVE Operation”
button again, and the air conditioner
will adjust capacity to the set
temperature for normal operation.
When you enter the living room in the
morning, the temperature will be just right.
Disengaging HOME LEAVE Operation
will return the temperature to that set
for normal operation. Even the coldest
winters will pose no problem!
Once you record the temperature and air flow rate settings you most often use, you can retrieve them by
pressing HOME LEAVE button. You do not have to go through troublesome remote control operations.
What’s the HOME LEAVE operation?
Useful in these cases
•
Every day before you leave the house...
• Once the temperature and air flow rate for HOME LEAVE operation are set, those settings will be used
whenever HOME LEAVE operation is used in the future. To change these settings, please refer to the
“Before using HOME LEAVE operation” section above.
• HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in AUTO, DRY, and
FAN mode.
• HOME LEAVE operation runs in accordance with the previous operation mode (COOL or HEAT) before
using HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot be used at the same time.
Last button that was pressed has priority.
• The operation mode cannot be changed while HOME LEAVE operation is being used.
• When operation is shut off during HOME LEAVE operation, using the remote controller or the indoor unit
ON/OFF switch, “ ” will remain on the remote controller display.