- 21 -
Chapter 4 Recording of operation data
(4) This is the window of the [Network map selection].
(Notes)
1. For one customer, multiple network maps can be managed.
2. On the unit of network map,
(1) In case of the DIII-NET connection, construct by every object, or even if the
objects are same, construct separately each network map for both sides
divided by DIII-NET expansion adapter(DTA109A1).
・
In case of being same network map for a customer with operation data
recorded previously, press the [O.K.(F1)] by placing the cursor in the
corresponding network map. Proceed to the window of the [Network Map
Display]. (Refer to
“
4.1.2 Network Map Display
”
.)
・
In case of being different network maps ( for DIII-NET connected objects,
different DIII-NET expansion adapter, different PCB connected outdoor units)
for a customer with operation data recorded previously, press the [New(F2)] ,
and proceed to the [Access Method Selection] window. Proceed to (5).
・
In case of changing the name of network map, press the [Edit map name (F3)],
and proceed to the [Access Method Selection] window. Proceed to (5).
・
When deleting a network map, press the [Delete customer(F9)]
・
When returning to the previous stage, press the [Cancel(ESC)] button
