Si281317
Procedure to Remove Propeller Fan and Fan Motor
Removal Procedure
3
2. Procedure to Remove Propeller Fan and Fan
Motor
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
Remove the front and top
panels in accordance with
the Procedure to remove
Outside Panels.
1. Remove the propeller fan
1
Unscrew the 4 screws
that fix the air discharge
grille and disengage the
4 hooks at the top and
bottom of the grille, and
then remove this air
discharge grille.
2
Unfasten the fan lock
nut that fixes the
propeller fan.
2. Remove the fan motor
In order to disconnect the
connector, do not pull the
lead wire. Hold the
connector part and then
press the hooks.
Cautions in mounting the
motor
Be sure to fix the motor lead
wire with a clamp. Not
heeding this caution will
cause the entanglement of
the lead wire around the fan,
which will result in damage
to the fan.
1
Remove the connector
for the fan motor from
the PCB.
(X206A, X207A)
2
The lead wire is
clamped in 3 places.
(Click on partition
plate×3 places)
3
Unscrew the 3 screws
that fix the front panel
and then pull up the
lead wire.
4
Unfastening the 4 lock
bolts from the fan motor
enables the removal of
this fan motor.
Air discharge grille
Fan lock nut
Propeller fan
Hooks
Hooks
Hooks
Connector for fan motor
Screws
(3 numbers)
Clamp
Bolts (4 numbers)
Lead wire
Propeller fan
