Outer Panels / Outdoor Fan / Fan Motor
Si001412E
4
Removal Procedure
8
Remove the nut and
remove the outdoor fan.
Nut size: M6
When reassembling, align
the
mark of the outdoor
fan with the D-cut section of
the motor shaft.
When reassembling, put the
fan motor lead wire through
the back of the fan motor
(so as not to be entangled
with the outdoor fan).
9
Unfasten the 2 hooks
and release the fan
motor lead wire.
10
Remove the 4 screws
and remove the fan
motor.
Be sure to remove the lower
screws first. If the upper
screws are removed first,
the fan motor may tilt or fall
because the center of its
gravity is toward the front. It
may cause injuries.
Step
Procedure
Points
Nut
Outdoor fan
(R21570)
10 mm
(0.39 inch)
(R18954)
(R3249)
Lead wire
Outdoor fan
Hook
(R21571)
Fan motor
(R21572)
