Daikin RXTQ-TAVJ9A, Manual

Page: 50 / 76

48
RXTQ-TAVJ9A / TAVJUA EDUS331608C-D
-Confirm capacity correction factor by piping length and level difference (K1)
-Calculate capacity correction factor by piping heat loss (K2)
(K2) = 1 + (heat loss factor per feet of piping × (equivalent piping length – 25 ft.)) / 100
In cooling mode, heat loss factor per feet at 93°F is calculated as below.
(R) Heat loss factor per feet = 0.072
*2
+ (0.098
*1
– 0.072
*2
) × (93
*3
– 86
*4
) / (95
*5
– 86
*4
) = 0.0922
Using “Equivalent piping length = 100 ft.” and “Heat loss factor per feet = 0.0922”,
(K2) = 1 + (0.0922 × (100 – 25)) / 100 = 1.07
-Calculate the corrected capacity of RXTQ60TAVJUA (C) by using (K1) and (K2).
Corrected capacity of RXTQ60TAVJUA (C) = (B) × (K1) / (K2) (add defrost correction factor for heating capacity)
Therefore (C) = 62.7 × 0.94 / 1.07 = 55.1 MBH
If the corrected capacity (C) is the same or greater than the required total heat load (A), selection is complete.
If (C) < (A), return to Procedure [3]–2 and provisionally select a larger outdoor unit.
In this example, 55.1 MBH (C) > 49.8 MBH (A), so there is no need to select a larger outdoor unit.
Cooling Ambient temperature
Heat loss factor per feet
of piping (%)
Heating Ambient temperature
Heat loss factor per feet
of piping (%)
5°F 14°F 23°F 32°F 41°F 50°F 59°F 68°F
0.328 0.305 0.282 0.256 0.233 0.210 0.187 0.161
(K1) = 0.94
41°F
0.000
50°F
0.000
59°F
0.013
68°F
0.030
77°F
0.046
86°F *4
0.072 *2
93°F *3
(R)
95°F *5
0.098 *1
104°F
0.125
100
10