Daikin RXTA30B2V1B, Service Manual

Page: 174 / 264

4 | Components
Service manual
174
RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
Repair procedures
FTXTM-R+(A)(F)TXTP-M units
To remove the swing flap motor
FTXTM30R
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see "4.17 Plate work" [
4
144].
1 Remove the switch box, see "4.17 Plate work" [
4
144].
2 As the swing flap motor wiring harness is also connected to the swing raster
motor,
remove the swing raster motor, see "4.21.2 Repair
procedures" [
4
186].
3 Remove the swing flap from the indoor unit (by clicking it out).
4 Remove the screw that fixes the swing flap motor.
b
a
c d
a Swing flap
b Screw (swing flap motor fixation)
c Swing flap motor
d Coupling piece
5 Remove the swing flap motor from the coupling piece.
6 To install the swing flap motor, see "Repair procedures" [
4
174].
FTXTM40R
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see "4.17 Plate work" [
4
144].
1 Remove the switch box, see "4.17 Plate work" [
4
144].
2 Remove the main swing flap from the indoor unit (by clicking it out).
3 Remove the secondary swing flap from the indoor unit (by clicking it out).
4 Remove the screw from the swing flap motor.