6
|
Unit installation
Installer reference guide
31
RXQ-A_ARXQ-A
R32 split series
4P513661-11P – 2021.11
a
Drain port
b
Bottom frame
c
Drain plug
d
Hose (field supply)
6.3.6 To prevent the outdoor unit from falling over
In case the unit is installed in places where strong wind can tilt the unit, take
following measure:
1
Prepare 2 cables as indicated in the following illustration (field supply).
2
Place the 2 cables over the outdoor unit.
3
Insert a rubber sheet between the cables and the outdoor unit to prevent the
cables from scratching the paint (field supply).
4
Attach the ends of the cables.
5
Tighten the cables.