8
FA ROTEX Solaris RPS4 -
04/2016
3
x
Manual operation
3.3.2 Optional accessories
KFE Filling connection
For convenient filling and draining of the ROTEX hot water
storage tank, you can connect the KFE filling connection
(KFE BA
16 52 15).
FlowGuard
For setting and display of the flow rate of 2-6 l/min, you can use
the setting valve (FlowGuard FLG
16 41 02).
Solar storage tank extension kit
If the heat output of a single ROTEX hot water storage tank is not
adequate, you can interconnect several Sanicube / HybridCube
as modules.
The following components are offered:
– Solar storage tank extension kit CON SX (
16 01 20
)
– Solar storage tank kit 2 CON SXE (
16 01 21
)
– FlowGuard FLG (
16 41 02
)
The installation and operation of this accessory component is de-
scribed in detail in the individual operating and installation in-
structions provided.
Additional pump kit for tall buildings
If the top edge of the solar panel is more than 12 m above the
erection surface of the solar storage tank, the system can be op-
erated up to a maximum total height of the system of 18 m if the
additional pump kit ZP-RPS4 (
16 42 43
) is installed.
