Si181296_A
Outdoor Unit
Removal Procedure
13
1.4
Thermistors
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
For the details of the
removal of the outdoor
temperature thermistor
(R1T), see the points
on the right column.
Removal of the outdoor
temperature thermistor
(R1T)
When reassembling, pass
the outdoor temperature
thermistor through the hole
so as the yellow marking
comes to the inside edge of
the heat exchanger plate.
2
Pull out the discharge
pipe thermistor (R2T).
3
Pull out the suction pipe
thermistors (R3T)
(R5T).
4
Pull out the subcooling
thermistor (R6T) and
the liquid pipe
thermistor (R7T).
5
Pull out the outdoor
heat exchanger
thermistor (R4T).
Suction pipe thermistor 2 (R5T)
Discharge pipe thermistor (R2T)
(R12975)
Subcooling
thermistor (R6T)
Suction pipe
thermistor 1 (R3T)
Liquid pipe thermistor
(R7T)
Outdoor heat exchanger
thermistor (R4T)
Hooks (2 places)
Right side panel
Notch
Fixing plate for thermistor (R1T)
Stopper
Outdoor temperature thermistor
Marking (yellow)
(R13061)
Removal
direction
