background image

 

Although this is a recognized measure for additional 

protection, with the grounding system in North 

America, a dedicated GFCI may not be necessary.

CAUTION

 

Do not use the air conditioner or heat pump for any 

other purposes other than comfort cooling or heating. 

Do not use the unit for cooling precision instruments, 

food, plants, animals or works of art.

 

Do not place items under the indoor unit it could result 

in damage by condensates that may form if the humidity 

is above 80% or if the drain outlet gets blocked.

 

Before cleaning, stop the operation of the unit by 

turning the power off or by pulling the supply cord out 

from its receptacle. Otherwise, an electric shock and 

injury could result.

 

Do not wash the air conditioner or heat pump with 

excessive water. An electric shock or fire could result.

 

Avoid placing the controller in a spot splashed with 

water. Water entering the controller could result in an 

electric shock or damage the internal electronic parts.

 

Do not operate the air conditioner or heat pump when 

using a room fumigation type of insecticide. Failure to 

observe this could result in the chemicals to be 

deposited in the unit and can endanger the health of 

those who are hypersensitive to chemicals.

 

Do not turn off the power immediately after stopping 

operation. Always wait for at least five minutes before 

turning off the power. Otherwise, water leakage could 

result.

 

The appliance is not intended for use by young 

children or infirm persons without supervision.

 

The remote controller should be kept away from 

children so they cannot play with it.

 

Consult with the installation contractor for cleaning.

 

Incorrect cleaning of the inside of the air conditioner 

or heat pump could result in the plastics parts break 

resulting in water leakage or electric shock.

 

Do not touch the air inlet or aluminum fin of the air 

conditioner or heat pump as they can cut and could 

result in injury.

 

Do not place objects in direct proximity of the outdoor 

unit. Do not let leaves and other debris accumulate 

around the unit. Leaves are a hotbed for small animals 

which can enter the unit. Once inside the unit, animals 

result in the unit malfunctioning, and could result in 

smoke or fire when they make contact with electrical 

parts.

NOTE

 

Never press the button of the remote controller with a 

hard, pointed object. The remote controller result in 

damage.

 

Never pull or twist the electric wire of the remote 

controller. It may result in the unit malfunctioning.

 

Do not place appliances that produce open flames in 

places that are exposed to the air flow of the unit or 

under the indoor unit. It may result in incomplete 

combustion or deformation of the unit due to the heat.

 

Do not expose the controller to direct sunlight. The 

LCD display can become discolored and may result in 

fail to display the data.

 

Do not wipe the controller operation panel with 

benzene, thinner, chemical dust cloth, etc. The result 

may be that the panel becomes discolored or the 

coating can peel off. If it is heavily dirty, soak a cloth in 

water-diluted neutral detergent, squeeze it well and 

wipe the panel clean. Then wipe it with another dry 

cloth.

 

Dismantling of the unit, disposal of the refrigerant, oil, 

and additional parts, should be done in accordance 

with the relevant local, state, and national regulations.

 

Operate the air conditioner or heat pump in a 

sufficiently ventilated area and not surrounded by 

obstacles. Do not use the air conditioner or heat pump 

in the following places.

a. Places with a mist of mineral oil, such as cutting oil.

b. Locations such as coastal areas where there is a lot 

of salt in the air.

c. Locations such as hot springs where there is a lot 

of sulfur in the air.

d. Locations such as factories where the power 

voltage varies a lot.

e. In cars, boats, and other vehicles.

f.  Locations such as kitchens where oil may splatter 

or where there is steam in the air.

g. Locations where equipment produces 

electromagnetic waves.

h. Places with an acid or alkaline mist.

i.  Places where fallen leaves can accumulate or where 

weeds can grow.

 

Take snow protection measures. Contact your dealer 

for the details of snow protection measures, such as 

the use of a snow protection hood.

 

Do not attempt to do electrical work or grounding work 

unless you are licensed to do so. Consult with your 

dealer for electrical work and grounding work.

 

Pay Attention to Operating Sound. Be sure to use the 

following places:

a. Places that can sufficiently withstand the weight of 

the air conditioner or heat pump yet can suppress 

the operating sound and vibration.

b. Places where warm air from the air outlet of the 

outdoor unit or the operating sound of the outdoor 

unit does not annoy neighbors.

 

Make sure that there are no obstacles close to the 

outdoor unit. Obstacles close to the outdoor unit may 

drop the performance of the outdoor unit or increase 

the operating sound of the outdoor unit.

 

Consult your dealer if the air conditioner or heat pump 

in operation generates unusual noise.

 

Make sure that the drainpipe is installed properly to 

drain water. If no water is discharged from the 

drainpipe while the air conditioner or heat pump is in 

the cooling mode, the result may be that the drainpipe 

becomes clogged with dust or dirt and water leakage 

from the indoor unit may occur. Stop operating the air 

conditioner or heat pump and contact your dealer.

ii

3P477778-2A

English

01_EN_3P477778-2A.indd   2

4/26/2017   11:51:18

Summary of Contents for RELQ72TATJU




















Reviews: