IM 738-2
127
Rooftop Equipment Warranty Registration Form
Warranty Registration Form (continued)
VI. GAS & OIL BURNER CHECK, TEST, & START
Specifications:
For gas, see
Forced Draft Gas Burner Installation and Maintenance Bulletin
.
For oil, see
Oil Fired Furnace Installation and Maintenance Bulletin
.
A. (Gas/Oil) Furnace model no. __________________
B. (Gas/Oil) Burner model no. ___________________
Serial no. ___________________
C. (Gas) Type firing:
Single
Stage two
Stage modulation
D. (Oil) Type firing start:
Full fire start
Low fire start
E. (Gas) Rated firing rate: _________________ MBH input
F. (Oil) Rated firing rate: _________________ GPH, #2 fuel oil
G. (Gas/Oil) Altitude: ___________________ ft. above sea level
H. Is there a circulating tank? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
VII. GAS BURNER CHECK, TEST, & START
A. Input:________________________________ CFH
B. Gas pressure at burner: ________________inches w.c.
C. CO
2
: __________________________ %
D. CO
2
: __________________________ %
E. Pilot flame only: ______________ microamps (steady at low fire)
F. Pilot Tap-gas pressure: _________________inches w.c.
G. Motor only/burner: FLA __________________ running amps
H. High limit control OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
I. Flame safeguard: ________________ microamps
J. Flame failure shutoff: _______________ seconds
K. Airswitch OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
L. High Gas Pressure Switch OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
M. Low Gas Pressure Switch OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
N. Main Gas Valve Close-off OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
VIII. OIL BURNER CHECK, TEST & START
A. Nozzle(s):
Type/manufacturer
GPH
Angle
Pattern manufacturer
B. Nozzle pressure: _______________________ psi
C. CO
2
: __________________________ %
D. Smoke spot: number_______________
E. Running amps_________________ FLA
F. Flame safeguard: microamps _________________
G. High limit control OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
H. Flame failure shutoff OK? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
No
N/A
I. Ignition failure check OK?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Yes
No
N/A
IX
.
Have all electronic or electrical controls been checked, adjusted, and tested for proper operation per the
installation and maintenance bulletins?
Yes
No
N/A
X. MAINTAINING MICROTECH CONTROL PARAMETER RECORDS
After the unit is checked, tested, and started and the final control parameters are set, record the final settings. Keep these records on file and
update whenever changes to the control parameters are made. Keeping a record facilitates any required analysis and troubleshooting of the
system operation and facilitates restoration after a controller replacement.
Signature: ______________________________________________________
Startup date: ___________________________________
RETURN COMPLETED FORM TO:
Daikin Applied
Warranty Department, 13600 Industrial Park Boulevard, Minneapolis, MN 55441
Please list any additional comments that could affect the operation of this unit; e.g., shipping damage, failed components, adverse installation
applications, etc., on a separate sheet and attach to this form.
Summary of Contents for RDT-135c
Page 131: ...IM 738 2 129...
