Si241319
Procedure to Remove Propeller Fan and Fan Motor
Removal Procedure
3
2. Procedure to Remove Propeller Fan and Fan
Motor
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
Removing top panel and
front panel according to
the “Procedure to
Remove Outside Panels”.
1. Removing propeller fan
1
Dismount 4 screws
fixing discharge grille
and disengage 4 hooks
located at upper and
lower sides of the grille
to remove the grille.
2
Remove fan stopper
and washer faced nut
fixing propeller fan.
2. Removing the fan motor
1
Disconnect the
connector for fan motor
from the el. compo.
box.
Do not pull the lead wire but
hold the connector and press
the hook section when
disconnect the connector.
Precautions for installing
motor
Be sure to fix the motor lead
wire with clamps, or the lead
wire could be caught with fan
resulting damage of parts.
2
Pull out the fastening
terminal from Capacitor
(C1R).
3
The lead wires are
clamped at 3 locations.
4
Fan motor can be
removed by removing 4
fixing bolts.
Propeller fan
Washer faced
Hook
Fan motor
Clamps
Screws
Capacitor
(C1R)
Lead wire
Propeller fan
