![background image](http://html1.mh-extra.com/html/daikin/quaternity-ftxg09hvju/quaternity-ftxg09hvju_operation-manual_2460275020.webp)
19
English
INFORMATION DISPLAY
Displays the room temperature and humidity and outdoor temperature.
Press
.
•
After pressing
, point the remote controller at the air conditioner unit for 2 seconds.
Return to
normal
display
Set temperature
Indoor temperature
Indoor humidity
Outdoor
temperature
The display changes every time
is pressed.
NOTE
Notes on INFORMATION DISPLAY
• The signal from the air conditioner is not being received properly if “
” is displayed when you press
. Repeat, aiming the remote
controller at the air conditioner.
• During operation, the outdoor temperature may sometimes be displayed higher than it actually is in COOLING or “SARARA” DRYING operation or
lower in HEATING operation (especially if frost has accumulated on the outdoor unit), due to the effects of the air blown from the outdoor unit or
the temperature of the heat exchanger.
• The lowest indoor and outdoor temperature which can be displayed is 16°F (−9°C). This will be displayed even if the actual temperature is lower.
The highest temperature is 99°F (37°C). This will be displayed even if the actual temperature is higher.
• The indoor and outdoor temperatures and the humidity which are displayed are those near the sensors attached to the main air conditioner unit.
• The displayed temperature and humidity should only be taken as approximations, as they may be affected if there are objects around the sensors
or due to direct sunlight, depending on where the air conditioner is installed.
01_EN_3P226009-1A.indd 19
10/29/2012 2:12:03 PM