English
12
AUTO · DRY · COOL · HEAT ·
FAN Operation
The unit operates with the operation mode of your choice.
From the next time on, the unit will operate with the same operation mode.
■
To start operation
1.
Press
and select an operation mode.
• Each pressing of the button advances the mode setting in sequence.
AUTO
DRY
COOL
HEAT
FAN
2.
Press
.
• “
” is displayed on the LCD.
• The OPERATION lamp lights green.
Display
■
To stop operation
Press
again.
• “
” disappears from the LCD.
• The OPERATION lamp goes off.
NOTE
MODE
Notes on each operation mode
HEAT
• Since this unit heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in lower
outdoor temperatures. If the heating effect is insuf
fi
cient, it is recommended to use another heating appliance in combination
with the unit.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,
it takes some time before the room gets warmer.
• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches
into defrosting operation to take away the frost.
• During defrosting operation, hot air does not
fl
ow out of indoor unit.
COOL
• This unit cools the room by releasing the heat in the room outside.
Therefore, the cooling performance of the unit may be degraded if the outdoor temperature is high
DRY
• The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically
controls temperature and air
fl
ow rate, so manual adjustment of these functions is unavailable.
AUTO
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside
temperatures and starts the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
FAN
• This mode is valid for fan only.
