Daikin Modular Plate, Instructions For Installation, Use And Maintenance Manual

Page: 48 / 64

48
Step 5: Perform a trial run
To commission the machine it is necessary (tick "
√
" the operations completed):
Check the proper connection of the fluid inlet and outlet piping to the thermal (if present) ex-
change coils (if present).
Vent the air from the heat exchange coils.
Check that there is a suitable siphon for all the water being drained.
Inspect the correct installation and adequate electrical connection of the energy recovery equip-
ment, together with a mechanical and electrical check.
Insert an anti-vibration coupling between the machine and the ducts.
Check the tightening of screws and bolts (especially those used to attach motors and fans).
Check the integrity of the anti-vibration supports and the various accessories.
Remove extraneous materials (e.g., assembly sheets, tools, clips, etc.) and dirt (footprints, dust, etc.)
from inside the sections.