32
English
State of the AIR MONITOR indicator and Their Meanings
In case the AIR MONITOR indicator blinks and an error code appears, unplug the power supply plug, wait at least 5 seconds, then
insert the power supply plug again and operate the unit. If an error code still appears, please refer to the procedures below:
AIR MONITOR Indicator
3 long
beeps
Troubleshooting
Electrical parts are faulty.
Contact the place of purchase
Electrical parts are malfunctioning.
Temperature sensor is faulty.
Humidity sensor is faulty.
Are the pre-fi lters, dust
collection fi lter attached?
These lamps may blink if the
unit is operated without a part
attached.
If all parts are attached
Electrical parts are faulty.
If one or more parts
are not attached
Unplug the power supply
plug, reattach the parts, and
then restart operation.
Is there a buildup of dust on
the pre-fi lters?
If there is no buildup of
dust
Electrical parts are faulty.
If there is a buildup of
dust
Unplug the power supply
plug, clean the pre-fi lter, and
then restart operation.
►
Page 27
Is the air outlet blocked?
If the air outlet is not
blocked
Electrical parts are faulty.
If the air outlet is
blocked
Remove any obstacles blocking the
air outlet, and then restart operation.
Error Code
Solution
Cause
3P690982-1-OM-MC80ZVM-DAIKIN.indd 32
3P690982-1-OM-MC80ZVM-DAIKIN.indd 32
22/11/2022 12:08:16 PM
22/11/2022 12:08:16 PM
