background image

14

English

3

Attaching the Deodorising Filter

1. 

Remove the service cover. 

1  Firmly hold the service cover grip and slowly pull 

it towards your direction while pressing the lever.

Lever

2. 

Remove 

fi

 lter 

fi

 xing unit.

1  Move the fi xing switch on fi lter fi xing unit to 

 

 

 

side to unlock.

 

Fixing switch

2  Lift up the grip on the top of the fi lter fi xing unit 

and pull out towards your direction.

Filter fi xing unit

Grip

3  Remove fi xing tape on the fi lter fi xing unit.

3. 

Remove the deodorising 

fi

 lter from the bag.

• 

Filter has no front and back.

Please wear gloves when 
handling the 

fi

 lter.

(To prevent dust from the 
deodorising fi lter from 
making your hand dirty.)

• 

Observe local waste separation regulations when 
disposing of the deodorising fi lter bag and 
desiccant.

4. 

Attach the deodorising 

fi

 lter.

Insert the short side of the fi lter into the main unit 
above the dust collection fi lter.

Short sides of the fi lter

Deodorising fi lter

[With the deodorising 

fi lter installed]

Deodorising fi lter

Gap on the 

left and right

Dust from the deodorising fi lter may turn the dust 
collection fi lter black, but it does not affect dust 
collection performance.

5. 

Attach the 

fi

 lter 

fi

 xing unit.

Attach the fi lter fi xing unit and move the fi xing switch 
to 

 

 

 side to lock it.

Fixing switch

Attention

•  Make sure to lock the fi lter fi xing unit. If it is unlocked 

and the unit is operated, performance drop or abnormal 
noise may occur.

6. 

Attach the service cover.

• 

When starting operation, if a notification tone 
sounds and the odour sensor lamp blinks, the 
deodorising filter and the filter fixing unit are not 
properly installed.

• 

Re-install the deodorising filter and the filter 
fixing unit.

Deodorising 
fi lter

3 long
beeps

Read First

4

Inserting the Power Supply Plug into the Socket

•  The basic sensitivity of the odour sensor will be determined by odour 

levels in the fi rst minute (approx.) after the power supply plug is 
inserted every time. 

Insert the power supply plug when the air is clean (odour-free).

 

Power supply plug

Power socket

3P690982-1-OM-MC80ZVM-DAIKIN.indd   14

3P690982-1-OM-MC80ZVM-DAIKIN.indd   14

22/11/2022   12:08:10 PM

22/11/2022   12:08:10 PM

Summary of Contents for MC80ZVM













































Reviews: