SiE74-202
Operating Manual
Operation Manual
7
1.5
CAUTION
Read this section carefully BEFORE using the
equipment.
Do not use the power cable if it is damaged.
Using a damaged power cable is extremely hazardous; if the
power cord becomes damaged, you must obtain a replacement
from the manufacturer or from a properly-authorized service
agent.
Do not use in humid places or places which might
be wet, such as bathrooms.
Contact with water can lead to electric shock or damage the
equipment.
Do not use outdoors or where exposed to direct
sunlight.
Direct sunlight can weaken remote control signal reception
sensitivity and discolor the casing.
Before changing filters, cleaning the equipment or
moving it, turn it OFF and unplug the power cable.
Working with power ON can lead to fire and/or electric shock.
Do not disassemble, service or modify this equipment.
Unwarranted tampering can lead to fire and/or malfunction.
Do not wipe with benzene or thinner, or spray with
insecticide.
Such substances can cause cracking, electric shock and/or fire.
Do not block the intake or outlet.
Blocked openings can reduce capacity (air will not be
cleaned throughout the entire room) and/or damage the
equipment.
Do not use near to sources of heat such as heaters.
Heat can discolor and deform the casing.
Do not use the power cable if damaged or loose in
the socket.
Using the power cable in anything but proper working
condition can lead to short-circuits and subsequently electric
shock and/or fire.
Keep the unit and remote control minimum 2 m
from lighting, TVs, radios, stereos and aerials.
This unit can disturb TV pictures and generate interference.
Illumination can weaken remote control signal reception
sensitivity and discolor the casing.
Summary of Contents for MC401VE
