19
Troubleshooting
Phenomenon
Check points
All the FAN lamps are blinking
together.
• Are the pre-
fi
lters and dust collection
fi
lter attached?
These lamps may blink if the unit is operated without a
part attached.
[If one or more parts are not attached]
Remove the power supply plug, reattach the parts and then
turn the unit on again.
[If all parts are attached]
An electrical component is faulty.
Contact the place of purchase.
• Is there a buildup of dust on the pre-
fi
lters?
[If there is a dust buildup]
►
Page 13
Remove the power supply plug, clean the pre-fi lters and
then turn the unit on again.
[If there is no dust buildup]
An electrical component is faulty.
Contact the place of purchase.
• Is the air outlet blocked?
[If the air outlet is blocked]
Remove any obstacles blocking the air outlet and then turn
the unit on again.
[If the air outlet is not blocked]
An electrical component is faulty.
Contact the place of purchase.
The lamps may blink if there is a sudden voltage fl uctuation.
The lamps will return to their previous condition once voltage
returns to normal.
Voltage range protection: 198V – 264V.
• If none of the conditions above occurs,
Contact the place of purchase. It is recommended to unplug
the unit until the service agent is arrive.
Sometimes the Streamer lamp
does not light up
• The Streamer may stop operation depending on the time
control.
Streamer lamp turns off when the Streamer stop operating.
The Streamer lamp blinks
• Streamer is recommended to be replaced.
Contact the place of purchase.
The MODE lamp blinks
• Is the deodorising
fi
lter unit attached?
Attach the deodorising fi lter unit.
►
Page 14
Troubleshooting
1-3P664947-7-OM-MC30YVM-SLEEP-DAIKIN_EN.indd 19
1-3P664947-7-OM-MC30YVM-SLEEP-DAIKIN_EN.indd 19
11/1/2022 12:06:22 PM
11/1/2022 12:06:22 PM
