Daikin Madoka BRC1H82K, Installer And User Manual

Page: 73 / 136

14 | Configuration
Installer and user reference guide
73
BK+S
Madoka wired remote controller
4P596268-1A – 2022.02
Indoor unit field settings
The setting procedure is different depending on whether you want to make
settings for individual indoor units, or for groups of indoor units.
Individual indoor units
▪ Define a mode by setting a Mode number (number between brackets)
▪ Define the unit to which the setting will apply by setting a Unit number
▪ Define the setting by setting a SW number
▪ Define a value for that setting
Groups of indoor units
▪ Define a mode by setting a Mode number (number NOT between brackets)
▪ Do NOT set a Unit number (setting applies to all the units in the group)
▪ Define the setting by setting a SW number
▪ Define a value for that setting
Mode SW Setting (SW) description —
01 02 03 04
10 (20) 00 Filter contamination timer : set the timer for the
appearance of the "Time to clean filter" sreen.
Ultra long life filter Light ±10000 hrs. Heavy ±5000 hrs — —
Long life filter ±2500 hrs ±1250 hrs
Standard filter ±200 hrs ±100 hrs
01 Long life filter : if applicable, set which type of long life filter is used. Long life filter Ultra long life filter — —
02 Controller thermostat sensor : set how the controller thermostat sensor is
used.
Used in combination with indoor unit
thermistor
Not used Used
exclusively
—
03 Disable filter sign : set whether or not the filter sign can be displayed. Display Do not display — —
11 (21) 00 Simultaneous operation : set the simultaneous indoor unit operation mode
(Sky Air)
Pair Twin Triple Double twin
12 (22) 01 External On/OFF input : set the operation of voltage free contacts T1/T2
(indoor unit contacts)
Forced OFF On/OFF operation Emergency Forced OFF
(multi-tenant)
02 Thermostat differential : if the system contains a remote sensor, set the
increase/decrease increments.
1°C 0.5°C — —
13 (23) 00 High air outlet velocity : set in case of high-ceiling applications. h≤2.7 m 2.7 m<h≤3 m 3 m<h≤3.5 m
01 Airflow direction : set in case an indoor unit is equipped with an option kit that
blocks the airflow.
4-way flow 3-way flow 2-way flow —
03 Airflow function : set whether the indoor unit is equipped with a decoration
panel at its air outlet.
Equipped Not equipped
04 Airflow direction range Upper Normal Lower —
06 External static pressure : set the external static pressure (according to the
resistance of the connected ducts).
Normal High static pressure Low static
pressure
—
FHYK: follow the high-ceiling setting. Normal High ceiling — —
15 (25) 03 Humidification drain pump Not equipped Heating operation: continuous Heating operation: 3 minutes
ON/5 minutes OFF
(a)
1c 01 Thermostat sensor : set which thermostat sensor you want to use. Indoor unit thermistor Controller thermistor — —
1c 12 Window contact B1 (external input) Do not use Use
1c 13 Key card contact B2 (external input) Do not use Use
1e 02 Setback function : set Setback operation. No Setback Heating only Cooling only Heating and
Cooling
1e 07 Rotation overlap time . Set the Rotation overlap time. 30 minutes 15 minutes 10 minutes 5 minutes
1B 08 Daylight saving time . Set how the system controls daylight saving time. Disable Automatic changeover Manual
changeover
Centralised
control
(a)
This is applicable for codes 02-06. Codes 05 and 06 are not shown in the table. See the service manual for more detailed
information.