Daikin Madoka BRC1H82K Installer And User Manual Download Page 46

Page: 46 / 136

Remote controller: Overview

Installer and user reference guide

BK+S

Madoka wired remote controller

4P596268-1A – 2022.02

12.1.1 To configure the controller

You can configure the controller to be operable in either one of three modes. For
more information about the modes, see

"12.1 About the controller"

[

45].

Mode

Configuration

Normal (default)

Change remote controller field setting:

Mode:

SW:

Value:

Alarm only

Change remote controller field setting:

Mode:

SW:

Value:

Supervisor

Change remote controller field setting:

Mode:

SW:

Value:

For more information on how to change remote controller field settings, see

"14.1.4 Field settings"

[

69].

12.2 Buttons

b d

ON/OFF

▪

When OFF, press to turn ON the system.

▪

When ON, press to turn OFF the system.

ENTER/ACTIVATE /SET

▪

From the home screen, enter the main menu.

▪

From the main menu, enter one of the submenus.

▪

From their respective submenu, activate an operation/ventilation mode.

▪

In one of the submenus, confirm a setting.

CYCLE/ADJUST

▪

Cycle left.

▪

Adjust a setting (default: decrease).

CYCLE/ADJUST

▪

Cycle right.

▪

Adjust a setting (default: increase).

Summary of Contents for Madoka BRC1H82K








































































































































Search results

Summary of Contents for Madoka BRC1H82K

Reviews:

Brands by name

Popular brands

Daikin Madoka BRC1H82K, Installer And User Manual

Search results

Summary of Contents for Madoka BRC1H82K

Reviews:

Brands by name

Popular brands