T-CU11-OCT22-0
Page II
IMPORTANT!
READ BEFORE PROCEEDING!
GENERAL SAFETY GUIDELINES
This guideline is intended for users to ensure safe installation, operation, and maintenance of DAIKIN SEES condensing
units. This guideline is not intended to replace the system expertise available from the system manufacturers.
This equipment is a relatively complicated apparatus. During installation, operation, maintenance or service, individuals
may be exposed to certain components or conditions including, but not limited to refrigerants, materials under pressure,
rotating components, and both high and low voltage. Each of these items has the potential, if misused or handled
improperly, to cause bodily injury or death. It is the obligation and responsibility of operating/service personnel to
identify and recognize these inherent hazards, protect themselves, and proceed safely in completing their tasks. Failure to
comply with any of these requirements could result in serious damage to the equipment and the property in which it is
situated, as well as severe personal injury or death to themselves and people at the site.
This document is intended for use by owner-authorized operating/service personnel. It is expected that these individuals
possess independent training that will enable them to perform their assigned tasks properly and safely. It is essential that,
prior to performing any task on this equipment, this individual shall have read and understood this document and any
referenced materials. This individual shall also be familiar with and comply with all applicable governmental standards
and regulations pertaining to the task in question
SAFETY SYMBOLS
The following symbols are used in this document to alert the reader to specific situations:
WARNING
Warning! Risk of serious injury or death
to person!
NOTICE
Notice! Risk of damage to
equipment!
CAUTION
Caution! Danger which can lead to
serious damages!