User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
223
10. Power Proportional Distribution
10-1 Power Proportional Distribution Function
Power Proportional Distribution is a function that proportionally distributes the total power used by
the air conditioners in a rental building and the like, measured using an electricity meter among the
tenants. The proportional distribution calculation can also be exported to a CSV file.
To use this function, you must set up groups for proportional distribution, input devices, etc. as well
as run a trial on a PC in advance. Consult your service person.
Proportional distribution cannot be calculated if the controller is turned off. Do not turn off the
controller if calculating proportional distribution.
This chapter describes operations to be performed on the iTM unit.
Setting up the data collection period
Touch the PPD button on the Operation Mgmt. tab of the Menu List screen and display the Power
Proportional Distribution screen (see page 56).
(1)
(2)
(a)
(b)
Set the data collection period in
(1)
.
Select the
Period
radio button
(a)
to set the collection start and end dates.
Touch the Modify button for Start date and End date, and enter the dates in the respective Date
Input dialog that appears.
The range of dates you can enter is between the 1st of the same month of the previous year and
the previous day of the day you opened the dialog. The order of the start date and end date must
not be inverted.
Operating Optional Maker Functions
Summary of Contents for Intelligent Touch Manager DCM601A71
Page 309: ...EM11A017 1208 HT...
