0
I
t'
Checking the Inverter Output and Temperature Display
• When "Good Sleep/Display" key of remote controller push down and hold it for � 2 second then
"DISPLAY" IR Signal will be transmitted.
• The inverter output and temperature display for the indoor unit shows the current inverter output,
indoor temperature, and set temperature.
■
Checking current inverter output, indoor temperature and set temperature when
air conditioner is in operation
GOOD SLEEP/
1. Press [O/iii) for � 2 seconds during operation
DISPLAY
GOOD SLEEP/
• Each press of
l�f!l
for � 2 seconds, Cycles the display through current inverter
output, indoor temperature, and set temperature.
No display (Default)
Inverter output
Indoor temperature
Set temperature
• Inverter output service as an estimate of power consumption.(where rated power
consumption is 100%}
• There is a" . "(dot) after the set temperature figure.
• Inverter output does not display when the unit is in FAN operation.
• Set temperature does not display when the unit is in DRY operation or FAN
operation.
• Inverter output and set temperature may not display depending on the operation
mode that is active.
• The display turns off when the unit is turned off.
■
Checking current indoor temperature when the air conditioner is off
1. Press"foi�1
1
when the air conditioner is OFF and remote is ON.
DISPLAY
• The current indoor temperature displays.
• Press the button again to turn off the display.
NOTE
■ Note on the Inverter output and temperature display
•
"F.L."
displays as inverter output when the rated power consumption is exceeded.
• " • • "may display for a short while after the air conditioner is turned on or at other
times.
• Inverter output may be low at times for the purposes of protecting the product.
• When the unit is operated using another device, such as a wired remote controller or
smartphone, the set temperature displayed may not match the set temperature on the
remote controller.
• An error code will display if the air condttioner fails to operate when turned on. Consult
your service centre. Refer to the error code table in
"Troubleshooting".
anllJ
10
Summary of Contents for GTKC48UV16W
Page 20: ......
