background image

1

English

FXZQ05TAVJU FXZQ12TAVJU
FXZQ07TAVJU FXZQ15TAVJU
FXZQ09TAVJU FXZQ18TAVJU

VRV SYSTEM Inverter Air Conditioners

Installation manual

Contents

Before installation ……………………………………………………… 1
Selecting installation site ……………………………………………… 2
Preparations before installation ……………………………………… 3
Indoor unit installation ………………………………………………… 3
Refrigerant piping work ……………………………………………… 4
Drain piping work ……………………………………………………… 5
Electric wiring work …………………………………………………… 6

Wiring example and how to set the remote controller

 ……………… 7

Wiring example

 ………………………………………………………… 8

Installation of the decoration panel …………………………………… 8
Field setting …………………………………………………………… 8
Test operation ………………………………………………………… 10

READ THESE INSTRUCTIONS CAREFULLY BEFORE 
INSTALLATION. KEEP THIS MANUAL IN A HANDY PLACE 
FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR ATTACHMENT OF 
EQUIPMENT OR ACCESSORIES COULD RESULT IN 
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR 
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY 
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE 
SPECIFICALLY DESIGNED FOR USE WITH THE 
EQUIPMENT AND HAVE THEM INSTALLED BY A 
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCEDURES OR USE, 
ALWAYS CONTACT YOUR DAIKIN DEALER FOR ADVICE 
AND INFORMATION.

The English text is the original instruction. Other languages are 

translations of the original instructions.

Before installation

 

„

Leave the unit inside its packaging until you reach the installation 
site. Where unpacking is unavoidable, use a sling of soft material or 
protective plates together with a rope when lifting, this to avoid 
damage or scratches to the unit. 
When unpacking the unit or when moving the unit after unpacking, 
be sure to lift the unit by holding on to the hanger bracket without 

exerting any pressure on other parts, especially on refrigerant 

piping, drain piping and other resin parts.

 

„

Refer to the installation manual of the outdoor unit for items not 
described in this manual.

 

„

Caution concerning refrigerant series R410A: 

The connectable outdoor units must be designed exclusively for 

R410A.

Precautions

 

„

This appliance is not intended for use by persons, including 
children, with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 
Children should be supervised to ensure that they do not play with 
the appliance.

 

„

This appliance is intended to be used by expert or trained users in 

shops, in light industry and on farms, or for commercial use by lay 
persons.

 

„

Do not install or operate the unit in rooms mentioned below.

 

-

Places with mineral oil, or filled with oil vapour or spray like in 

kitchens. (Plastic parts may deteriorate.)

 

-

Where corrosive gas like sulphurous gas exists. (Copper 

tubing and brazed spots may corrode.)

 

-

Where volatile flammable gas like thinner or gasoline is used.

 

-

Where machines generating electromagnetic waves exist. 

(Control system may malfunction.)

 

- Where the air contains high levels of salt such as air near the 

ocean and where voltage fluctuates a lot (e.g. in factories). 

Also in vehicles or vessels.

 

„

When selecting the installation site, use the supplied paper pattern 
for installation.

 

„

Do not install accessories on the casing directly. Drilling holes in the 

casing may damage electrical wires and consequently cause fire.

Accessories

Check if the following accessories are included with your unit.

1 pc.

1 pc.

8 pcs.

4 pcs.

1 pc. each

7 pcs.

1 pc.

1 pc.

1 pc.

1 pc.

1 pc.

1 pc.

8

9

11

10

12

13

1

2

3

1 pc.

14

5

4

6

1 pc.

7

Metal clamp

Drain hose

Washer for hanger bracket

Screw

Installation and operation manuals

Clamp

Insulation for fitting for gas pipe

Insulation for fitting for liquid pipe

Large sealing pad

10 

Medium 1 sealing pad

11 

Medium 2 sealing pad

12 

Small sealing pad

13 

Paper pattern for installation (cut out from upper part of packing)

14 

Washer for conduit

Page

01_EN_3P493125-1.indd   1

9/21/2017   10:16:28

Summary of Contents for FXZQ05TAVJU

















Reviews: