Daikin FXMQ30MVJU, Operation Manual

Page: 3 / 8

English 3
• Never touch the internal parts of the controller.
Do not remove the front panel. Some parts inside are dan-
gerous to touch, and a machine trouble may happen. For
checking and adjusting the internal parts, contact your
dealer.
• Avoid placing the controller in a spot splashed with
water.
Water coming inside the machine may cause an electric
leak or may damage the internal electronic parts.
• Do not operate the air conditioner when using a room
fumigation - type insecticide.
Failure to observe could cause the chemicals to become
deposited in the unit, which could endanger the health of
those who are hypersensitive to chemicals.
• Do not put a finger, a rod or other objects into the air
inlet or outlet. As the fan is rotating at high speed, it
will cause injury.
• Do not touch the heat exchanger fins.
Improper handling may result in injury.
• Safely dispose of the packing materials.
Packing materials, such as nails and other metal or
wooden parts, may cause stabs or other injuries.
Tear apart and throw away plastic packaging bags so that
children will not play with them. If children play with a plas-
tic bag which was not torn apart, they face the risk of suf-
focation.
• Do not turn off the power immediately after stopping
operation.
Always wait at least five minutes before turning off the
power. Otherwise, water leakage and trouble may occur.
• The appliance is not intended for use by young chil-
dren or infirm persons without supervision.
• The remote controller should be installed in such
away that children cannot play with it.
NOTE
• Never touch the air outlet or the horizontal blades
while the swing flap is in operation.
Fingers may become caught or the unit may break down.
• Never press the button of the remote controller with a
hard, pointed object.
The remote controller may be damaged.
• Never pull or twist the electric wire of the remote
controller.
It may cause the unit to malfunction.
• Do not place appliances which produce open fire in
places exposed to the air flow from the unit or under
the indoor unit. It may cause incomplete combustion
or deformation of the unit due to the heat.
• Arrange the drain hose to ensure smooth drainage.
Incomplete drainage may cause wetting of the build-
ing, furniture etc.
• Do not place the controller exposed to direct sunlight.
The LCD display may get discolored, failing to display the
data.
• Do not wipe the controller operation panel with ben-
zine, thinner, chemical dustcloth, etc.
The panel may get discolored or the coating peeled off. If
it is heavily dirty, soak a cloth in water-diluted neutral
detergent, squeeze it well and wipe the panel clean. And
wipe it with another dry cloth.
• Dismantling of the unit, treatment of the refrigerant,
oil and eventual other parts, should be done in accor-
dance with the relevant local and national regulations.
• Do not dry the filter by exposing it to direct sunlight or
warming it using fire, etc. Doing so can result in the
deformation of the filter.