![background image](http://html1.mh-extra.com/html/daikin/fxfq100svm/fxfq100svm_operation-manual_2459716006.webp)
5
3P335595-2D English
5. Clean the suction grille.
Wash the suction grille with neutral detergent using a
soft brush and then dewater.
Detergent
When the suction grille is extremely contaminated
• Spray the detergent for a ventilating fans and ranges
directly to the suction grille, and keep it under that
condition for about 10 minutes.
After that, carefully wash the suction grille with water.
NOTE
• Do not wash the suction grille with water of 50°C or
higher.
It may cause discoloration and deformation.
• When drying the suction grille, do not heat it with fire.
It may cause burning.
6. Attach the air filter.
Refer to clause 4 for
“HOW TO CLEAN THE AIR
FILTER”. (Page. 4)
7. Attach the suction grille.
Attach the suction grille in the reverse order mentioned
in the clause 3.
8. Attach the straps of the suction grille.
Attach the straps in the reverse order mentioned in the
clause 2.
9. Close the suction grille.
Refer to clause 5 for
“HOW TO CLEAN THE AIR
FILTER”. (Page. 4)
HOW TO CLEAN AIR OUTLET, SUCTION GRILLE, THE
EXTERIOR AND REMOTE CONTROLLER
• Wipe
them with a dry soft cloth.
•
When the stain cannot be wiped off, dip the cloth in the
neutral detergent diluted with water and twist the cloth.
After wiping off stain with this cloth, wipe them with dry
cloth.
NOTE
• Do not use such as gasoline, benzine, thinner, polish
ing powder and liquid insecticide sold in the market.
It may cause discoloration and deformation.
• Do not wash them with water of 50°C or higher.
It may cause discolorization and deformation.
• Be careful not to damage the sensor surface.
The sensors, if damaged, may not provide correct
sensing performance.
Summary of Contents for FXFQ100SVM
Page 7: ......