![background image](http://html1.mh-extra.com/html/daikin/fxaq20pv1/fxaq20pv1_installation-manual_2459660010.webp)
8
English
(6) Hook the indoor unit onto the installation panel. (Refer to Fig. 9)
•
Placing buffering material between the wall and the indoor unit at this time will make work easier.
For right, bottom-right, and back-right piping
•
Pass the drain hose and the refrigerant piping to the wall.
(7) Pass power supply wiring, transmission wiring, ground wiring, and remote controller wiring
through the wiring guide in through the back of the indoor unit and to the front.
(8) Connect the piping. (See “5.REFRIGERANT PIPING WORK” and Fig. 10)
Drain plug
Insulating tube
Fig. 8
Do not place lubricant (refrigerant oil) when inserting.
This may cause deterioration and water leaks.
Insert using a hexagon wrench (4mm).
Make sure
there are
no gaps.
Refrigerant piping
Be sure to pass all wires through
the wiring guide.
Tab
(There are 2 places.)
Wiring (locally procured)
Power supply wiring, Transmission wiring, Ground wiring,
Remote controller wiring
Wall
Installation panel
(accessory) (1)
Front panel
Front grill
Service lid
Place buffering material
Hook the indoor unit hook onto the installation panel (1).
Fig. 9
Secure with
vinyl tape.
Wrap the insulating tape overlapping at least half the width with
each wrap.
Wrap the insulating tape all the way to the L-shaped bend.
Seal with putty corking
material.
Drain hose
Wiring
Fig. 10
Refrigerant piping
A
A
arrow view
Power supply wiring and
ground wiring
Refrigerant piping
Transmission wiring and
remote controller wiring
01_EN_3P156215-12U.fm Page 8 Thursday, August 27, 2009 4:09 PM