![background image](http://html1.mh-extra.com/html/daikin/ftyn50gv1a/ftyn50gv1a_operation-manual_2459579016.webp)
15
■
To use ON TIMER operation
•
Check that the clock is correct. If not, set the
clock to the present time
(page 9.).
1. Press “ON TIMER button”.
is displayed.
blinks.
2. Press “TIMER Setting button”
until the time setting reaches the
point you like.
•
Every pressing of either button increases
or decreases the time setting by 10 min-
utes. Holding down either button changes
the setting rapidly.
3. Press “ON TIMER button” again.
•
The TIMER lamp lights up.
■
To cancel ON TIMER operation
4. Press “CANCEL button”.
•
The TIMER lamp goes off.
■
To combine ON TIMER and OFF TIMER
•
A sample setting for combining the two timers is shown below.
ATTENTION
■
In the following cases, set the timer again.
•
After a breaker has turned OFF.
•
After a power failure.
•
After replacing batteries in the remote controller.
2
1, 3
4
Display
(Example)
Present time: 11:00 p.m.
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
01_En_3P232468-5.fm Page 15 Wednesday, June 4, 2008 9:28 AM
Summary of Contents for FTYN50GV1A
