manualshive.com logo in svg

Daikin FTXV50UVMA, Operating Manual

Share
Download
Daikin FTXV50UVMA Operating Manual Download Page 8

7

Read Before Operation

Read Before Operation

Remote Controller

Signal transmitter

Receiver

• To use the remote controller, aim the 

transmitter at the indoor unit. If there is 
anything blocking the signals between 
the unit and the remote controller, such 
as a curtain, the unit may not operate.

• The maximum transmission distance is 

about 7m.

FAN setting button

• Selects the airfl ow rate setting. 

 

 Page  12

POWERFUL button

• POWERFUL operation. 

 Page  17

Model name ARC466A28

Display (LCD)

• Displays the current settings.

(In this illustration, each section is 
shown with all its displays on for the 
purpose of explanation.)

TEMPERATURE 

adjustment button

• Changes the temperature setting.

  

 Page  11

ON/OFF button

• Press this button once to start 

operation.
Press once again to stop it. 

 Page  11

Front cover

• Open the front cover. 

 Page  8

01_EN_3P552666-9C.indd   7

29-Apr-19   8:43:37 AM

Summary of Contents for FTXV50UVMA









































Reviews:

No comments

Brands by name

Popular brands

Load more brands