5
|
Operation
User reference guide
39
FTXTM-R, FTXTM-S
Daikin room air conditioner
4P728152-2 – 2023.03
4
Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result:
If the connection to your communication device is successful, the
timer LED is blinking in 1.0 s interval and the operation LED is off.
INFORMATION
If the connection with your router is not possible, try procedure
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
On home screen menu, hold
for at least 5 seconds while the unit is not
operating.
Result:
The SP menu appears. is blinking.
2
Change to the SP menu by pressing
twice or
repeatedly.
2×
(5 sec.)
3
Press
to confirm the selection.
Result:
is blinking. The timer LED and operation LED are blinking
simultaneously.
4
Open the ONECTA application on your smart device and follow the steps on
the screen.
Result:
If the connection to your smart device is successful, the timer LED is
blinking in 1.0 s interval and the operation LED is off.
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To reset the connection setting to the factory default
Reset the connection setting to the factory default in case you want to:
▪
disconnect the wireless LAN and the communication device (e.g. router) or smart
device,
▪
repeat the setting if the connection was unsuccessful.
1
On home screen menu, hold
for at least 5 seconds while the unit is not
operating.
Result:
The SP menu appears. is blinking.
2
Change to the SP menu by pressing
twice or
repeatedly.
2×
(5 sec.)
3
Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. The operation and timer LEDs are blinking at the same
time in 1 s interval. The setting is reset to the factory default.
