5
|
Operation
User reference guide
21
FTXTM-R, FTXTM-S
Daikin room air conditioner
4P728152-2 – 2023.03
Setting
Description
Automatic
The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
Drying
The system decreases the humidity in a room.
Heating
The system heats up a room to the temperature
setpoint.
Cooling
The system cools down a room to the
temperature setpoint.
Fan
The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
Additional info:
▪
Outside temperature.
The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪
Defrost operation.
During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
5.3.1 To start/stop operation mode and to set the temperature
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Cooling
: Operation mode = Heating
: Operation mode = Fan only
: Shows the set temperature.
1
Press
one or more times to select the operation mode.
Result:
The mode will be set as follows:
2
Press
to
start
operation.
Result:
and the selected mode are displayed on the LCD.
3
Press
or
one or more times to lower or raise the
temperature
.
Cooling operation Heating operation Automatic
operation
Drying or Fan only
operation
18~32°C
10~30°C
18~30°C
—
Note:
When using
drying
or
fan
only
mode, you cannot adjust the temperature.
4
Press
to
stop
operation.
Result:
disappears from the LCD. The operation lamp goes off.
