background image

6

 | 

Energy saving and optimum operation

User reference guide

42

FTXTA30C2V1B(W)(B)

Daikin room air conditioner

4P518786-11K – 2023.05

6 Energy saving and optimum operation

INFORMATION

Even if the unit is turned OFF, it consumes electricity.

When  the  power  turns  back  on  after  a  power  break,  the  previously  selected
mode will be resumed.

CAUTION

NEVER expose little children, plants or animals directly to the airflow.

NOTICE

Do  NOT  place  objects  below  the  indoor  and/or  outdoor  unit  that  may  get  wet.
Otherwise  condensation  on  the  unit  or  refrigerant  pipes,  air  filter  dirt  or  drain
blockage may cause dripping, and objects under the unit may get dirty or damaged.

WARNING

Do  NOT  place  a  flammable  spray  bottle  near  the  air  conditioner  and  do  NOT  use
sprays near the unit. Doing so may result in a fire.

CAUTION

Do  NOT  operate  the  system  when  using  a  room  fumigation-type  insecticide.
Chemicals  could  collect  in  the  unit,  and  endanger  the  health  of  people  who  are
hypersensitive to chemicals.

Observe the following precautions to ensure the system operates properly.

Prevent direct sunlight from entering a room during cooling operation by using
curtains or blinds.

Make sure the area is well ventilated. Do NOT block any ventilation openings.

Ventilate often. Extended use requires special attention to ventilation.

Keep doors and windows closed. If the doors and windows remain open, air will
flow out of your room causing a decrease in the cooling or heating effect.

Be careful NOT to cool or heat too much. To save energy, keep the temperature
setting at a moderate level.

NEVER place objects near the air inlet or the air outlet of the unit. Doing so may
cause a reduced heating/cooling effect or stop operation.

Turn the breaker off when the unit is NOT used for longer periods of time. If the
breaker is on, the unit consumes electricity. Before restarting the unit, turn the
breaker on 6 hours before operation to ensure smooth running.

Condensation may form if the humidity is above 80% or if the drain outlet gets
blocked.

Adjust  the  room  temperature  properly  for  a  comfortable  environment.  Avoid
excessive  heating  or  cooling.  Notice  that  it  may  take  some  time  for  the  room
temperature  to  reach  the  set  temperature.  Consider  using  the  timer  setting
options.

Adjust the air flow direction to avoid cool air from gathering on the floor or warm
air  against  the  ceiling.  (Up  during  cooling  or  dry  operation  to  the  ceiling  and
down during heating operation.)

Avoid direct air flow to room inhabitants.

Summary of Contents for FTXTA30C2V1BW

































































Reviews: