background image

11

To change the air flow rate setting

5. Press “FAN setting button”.

• Indoor unit quiet operation

When the air flow is set to “ 

 ”, the noise from the indoor unit will become quieter. 

Use this when making the noise quieter.

The unit might lose power when the fan strength is set to weak level.

To change the air flow direction

(page 12.)

NOTE

DRY mode

AUTO or HEAT or COOL or FAN mode

The air flow rate setting is not variable.

Five levels of air flow rate setting from “ 

 ” to “ 

 ”

plus “ 

 ” “ 

 ” are available.

Note on HEAT operation

• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating 

capacity becomes smaller in lower outdoor temperatures. If the heating effect is insufficient, it is 
recommended to use another heating appliance in combination with the air conditioner.

• The heat pump system heats the room by circulating hot air around all parts of the room. After the 

start of heating operation, it takes some time before the room gets warmer.

• In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, 

the system switches into defrosting operation to take away the frost.

• During defrosting operation, hot air does not flow out of indoor unit.

Note on DRY operation

• The computer chip works to rid the room of humidity while maintaining the temperature as 

much as possible. It automatically controls temperature and fan strength, so manual 
adjustment of these functions is unavailable.

Note on AUTO operation

• In AUTO operation, the system selects a temperature setting and an appropriate operation mode 

(COOL or HEAT) based on the room temperature at the start of the operation.

• The system automatically reselects setting at a regular interval to bring the room temperature to 

user-setting level.

• If you do not like AUTO operation, you can manually select the operation mode and setting 

you like.

Note on air flow rate setting

• At smaller air flow rates, the cooling (heating) effect is also smaller.

3P098586-1_Eng_1.book  Page 11  Wednesday, November 27, 2002  11:31 AM

Summary of Contents for FTXS50BVMB



































Reviews: