background image

19

ECONO/OUTDOOR UNIT 

QUIET Operation

 

ECONO operation

 

ECONO operation is a function which enables ef

fi

 cient operation by limiting the maximum power 

consumption value.

This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip 

when the product runs alongside other appliances.

[Example]

Normal operation

ECONO operation

• In case the air conditioner and other appliances which 

require high power consumption are used at same time, a 
circuit breaker may trip if the air conditioner operate with 
its maximum capacity.

• The maximum power consumption of the air conditioner is 

limited by using ECONO operation.
The circuit breaker will hardly trip even if the air 
conditioner and other appliances are used at same time.

Time

Maximum during normal operation

Maximum during ECONO operation

Normal 
operation

ECONO 
operation

From start up until set temperature is reached

Running current and power consumption

• This diagram is a representation for illustrative purposes 

only.
The maximum running current and power consumption of 
the air conditioner in ECONO operation vary with the 
connecting outdoor unit.

 

OUTDOOR UNIT QUIET operation

 

OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the out-
door unit.  This function is convenient during the night.

[Example]

Using the OUTDOOR UNIT QUIET operation during the night.

• The noise level of the 

outdoor unit will be lower.
This function is useful 
when you need to 
consider the noise for 
your neighbourhood.

Summary of Contents for FTXS42K2V1B














































Reviews: