background image

English

11

To change the airflow rate setting

5. Press “FAN setting button”.

• Indoor unit quiet operation

When the airflow is set to “

”, the noise from the indoor unit will become quieter. 

Use this when making the indoor unit quieter.
The unit might lose capacity when the airflow rate is set to a low level.

NOTE

DRY mode

AUTO or COOL or HEAT or FAN mode

The airflow rate setting is not variable.

Five levels of airflow rate setting from “ ” to “

” plus 

” “

” are available.

Note on HEAT operation

• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the 

heating capacity becomes smaller in lower outdoor temperatures.  If the heating effect is 
insufficient, it is recommended to use another heating appliance in combination with the air 
conditioner.

• The heat pump system heats the room by circulating hot air around all parts of the room.  

After the start of heating operation, it takes some time before the room gets warmer.

• In heating operation, frost may occur on the outdoor unit and lower the heating capacity.  In 

that case, the system switches into defrosting operation to take away the frost.

• During defrosting operation, hot air does not flow out of indoor unit.

Note on DRY operation

• The computer chip works to rid the room of humidity while maintaining the temperature as 

much as possible. It automatically controls temperature and fan strength, so manual 
adjustment of these functions is unavailable.

Note on AUTO operation

• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) 

based on the room temperature at the start of the operation.

• The system automatically reselects setting at a regular interval to bring the room 

temperature to user-setting level.

• If you do not like AUTO operation, you can manually select the operation mode and setting 

you like.

Note on airflow rate setting

• At smaller airflow rates, the cooling (heating) effect is also less.

01_EN_3P141693-2C (A4).fm  Page 11  Saturday, September 25, 2004  11:39 AM

Summary of Contents for FTXS18DVJU































Reviews: