background image

5 Energy saving and optimum operation

Operation manual

7

FTXP20~35M5V1B/B9
R32 split series
3P520336-6J – 2020.05

Result: 

  is  displayed  on  the  LCD  and  the  timer  lamp

lights up.

2

Press 

 again if you want to change the time setting.

INFORMATION

Each time 

 is pressed, the time setting advances by

1 hour. The timer can be set between 1 to 12 hours.

Example: 

  If 

  is  set  when  the  unit  is  NOT  operating,

operation will start after 2 hours.

3

To cancel the setting, press .

Result: 

  and  the  time  setting  disappear  from  the  LCD  and  the

timer lamp goes off.

To start/stop OFF timer operation

Use  this  feature  if  the  unit  is  operating  and  you  want  to  stop
operation after a certain time.

1

Press 

.

Result: 

  is  displayed  on  the  LCD  and  the  timer  lamp

lights up.

2

Press 

 again if you want to change the time setting.

INFORMATION

Each time 

 is pressed, the time setting advances by

1 hour. The timer can be set between 1 to 12 hours.

Example: 

 If 

 is set when the unit is operating, operation

will stop after 5 hours.

3

To cancel the setting, press .

Result: 

  and  the  time  setting  disappear  from  the  LCD  and  the

timer lamp goes off.

INFORMATION

Night set mode

When  the  OFF  timer  is  set,  the  air  conditioner
automatically  adjusts  the  temperature  setting  (0.5°C  up  in
cooling,  2.0°C  down  in  heating)  to  prevent  excessive
cooling/heating  and  ensure  a  comfortable  sleeping
temperature.

To combine OFF timer and ON timer

1

To  set  the  timers,  refer  to 

"To  start/stop  OFF  timer

operation" 

[

4

 7] and 

"To start/stop ON timer operation" 

[

4

 6].

Result: 

 and 

 are displayed on the LCD.

Example:

2

If 

 is set when the unit is operating.

Result: 

Operation 

stops

  in  1  hour  and  then 

starts

  7  hours

later.

3

If 

  is  set  when  the  unit  is  NOT

operating.

Result: 

Operation 

starts

  in  2  hours  and  then 

stops

  3  hours

later.

5

Energy saving and optimum
operation

INFORMATION

▪ Even if the unit is turned OFF, it consumes electricity.

▪ When the power turns back on after a power break, the

previously selected mode will be resumed.

CAUTION

NEVER  expose  little  children,  plants  or  animals  directly  to
the airflow.

WARNING

Do NOT place objects below the indoor and/or outdoor unit
that  may  get  wet.  Otherwise  condensation  on  the  unit  or
refrigerant pipes, air filter dirt or drain blockage may cause
dripping,  and  objects  under  the  unit  may  get  dirty  or
damaged.

WARNING

Do  NOT  place  a  flammable  spray  bottle  near  the  air
conditioner and do NOT use sprays near the unit. Doing so
may result in a fire.

Observe  the  following  precautions  to  ensure  the  system  operates
properly.

▪ Prevent  direct  sunlight  from  entering  a  room  during  cooling

operation by using curtains or blinds.

▪ Make  sure  the  area  is  well  ventilated.  Do  NOT  block  any

ventilation openings.

▪ Ventilate  often.  Extended  use  requires  special  attention  to

ventilation.

▪ Keep doors and windows closed. If the doors and windows remain

open,  air  will  flow  out  of  your  room  causing  a  decrease  in  the
cooling or heating effect.

▪ Be  careful  NOT  to  cool  or  heat  too  much.  To  save  energy,  keep

the temperature setting at a moderate level.

▪ NEVER place objects near the air inlet or the air outlet of the unit.

Doing  so  may  cause  a  reduced  heating/cooling  effect  or  stop
operation.

▪ Turn the breaker off when the unit is NOT used for longer periods

of time. If the breaker is on, the unit consumes electricity. Before
restarting the unit, turn the breaker on 6 hours before operation to
ensure smooth running.

▪ Condensation  may  form  if  the  humidity  is  above  80%  or  if  the

drain outlet gets blocked.

▪ Adjust  the  room  temperature  properly  for  a  comfortable

environment.  Avoid  excessive  heating  or  cooling.  Notice  that  it
may  take  some  time  for  the  room  temperature  to  reach  the  set
temperature. Consider using the timer setting options.

▪ Adjust the air flow direction to avoid cool air from gathering on the

floor  or  warm  air  against  the  ceiling.  (Up  during  cooling  or  dry
operation to the ceiling and down during heating operation.)

▪ Avoid direct air flow to room inhabitants.

▪ Operate  the  system  within  the  recommended  temperature  range

(26~28°C for cooling and 20~24°C for heating) to save energy.

Summary of Contents for FTXP20M5V1B













Reviews: