Daikin FTXM-V Series, Service Manual

Page: 132 / 172

Troubleshooting SiUS042113E
128 Part 6 Service Diagnosis
Reference
Reference
4.25 Electrical Box Temperature Rise
Error Code
L3
Method of Error
Detection An electrical box temperature rise is detected by checking the radiation fin thermistor with the
compressor off.
Error Decision
Conditions  With the compressor off, the radiation fin temperature is above A .
 The error is cleared when the radiation fin temperature drops below B .
 To cool the electrical components, the outdoor fan starts when the radiation fin temperature
rises above
C and stops when the radiation fin temperature drops below B .
Supposed
Causes  Defective outdoor fan motor
 Short circuit
 Defective radiation fin thermistor
 Disconnection of connector
 Defective outdoor unit PCB
Troubleshooting
Check No.17 Refer to P.141
Check No.19 Refer to P.142
A B C
(°C) (°F) (°C) (°F) (°C) (°F)
09/12 class 122 252 64 147 113 235
18/24 class 92 198 70 158 77 171
Caution
WARNING
To cool the electrical components,
the outdoor fan starts when the
radiation fin temperature rises
above
C and stops when the radiation
fin temperature drops below B .
(R22998)
YES
NO
YES
NG
NO
OK
NO
YES
Turn off the power. Then, turn on
the power to restart the system.
Check the radiation fin
temperature.
Radiation fin dirty?
Check No. 19
Check the outdoor fan.
Error again or
outdoor fan activated?
Replace the outdoor unit
PCB (main PCB).
Clean up the radiation fin.
Be sure to turn off the power switch before connecting or disconnecting
connectors, or parts may be damaged.
Replace the outdoor fan
motor.
Correct the connectors
and fan motor lead wire.
Replace the outdoor unit
PCB (main PCB).
Above A ?
Check the installation
condition.
Go to
Check No. 17 .