18
CARE
Care and Cleaning
CAUTION
■
Indoor unit, Outdoor unit and Remote controller
1. Wipe them with dry soft cloth.
■
Front panel
1. Open the front panel.
• Hold the panel at the recesses on the main
unit (2 recesses on right and left sides) and
lift it until it stops.
2. Remove the front panel.
• While lifting the front panel further, slide
it to the right and pull it to the front side.
The left rotating shaft is detached. Slide
the right rotating shaft to the left and pull
it to the front side to remove it.
3. Attach the front panel.
• Align the right and left rotating shafts of
the front panel with the grooves and
push them all the way in.
• Gently close the front panel. (Push both
ends and the center on the front panel.)
CAUTION
Units
• Don’t touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury.
• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
• For cleaning, do not use hot water above 40
°
C, benzine, gasoline, thinner, nor other volatile oils, pol-
ishing compound, scrubbing brushes, nor other hand stuff.
• After cleaning, make sure that the front panel is securely fixed.
Before cleaning, be sure to stop the operation and
turn the breaker OFF.
Recess on
main unit
Rotating
shaft
01_EN_3P208145-1E.fm Page 18 Tuesday, April 22, 2008 1:55 PM
