background image

4

 

 

Read Before Operation

• 

Do not sit on the outdoor unit, put things on the unit, or pull the unit. Doing so may cause accidents, such as falling or 

toppling down, thus resulting in injury, product malfunctioning, or product damage.

• 

Do not place objects that are susceptible to moisture directly beneath the indoor or outdoor units. Under certain conditions, 

condensation on the main unit or refrigerant pipes, air filter dirt or drain blockage may cause dripping, resulting in fouling or 

failure of the object concerned.

• 

After prolonged use, check the unit stand and its mounts for damage. If they are left in a damaged condition, the unit may 

fall and cause injury.

• 

To avoid injury, do not touch the air inlet or aluminium fins of the indoor or outdoor units.

• 

The appliance is not intended for use by unattended young children or infirm persons. Impairment of bodily functions and 

harm to health may result.

• 

Children should be supervised to ensure that they do not play with the unit or its remote controller. Accidental operation by 

a child may result in impairment of bodily functions and harm health.

• 

Avoid impacts to the indoor and outdoor units, or otherwise product damage may result.

• 

Do not place flammable items, such as spray cans, within 1m of the air outlet.

 

The spray cans may explode as a result of hot air from the indoor or outdoor units.

• 

Be careful not to let pets urinate on the air conditioner. Urination on the air conditioner may result in electric shock or fire.

• 

Do not wash the air conditioner with water, as this may result in electric shock or fire.

• 

Do not place water containers (vases, etc.) above the unit, as this may result in electric shock or fire hazards if they should 

topple over.

• 

Do not insert the batteries in the wrong polarity (+/-) orientation as this may result in short circuiting, fire, or battery leakage.

• 

Do not sit or hang on the panel. The panel may fall, and injury or product malfunctioning may result. 

• 

Do not sway the panel. The panel may hit people or objects, and injury or property damage may result.  

• 

Do not let children play around the panel. Injury or property damage may result. 

• 

Do not pull the wires. The wires may be broken and the panel may fall, and injury or property damage may result.

• 

Do not locate obstacles in the route. The panel may fall, and injury or property damage may result. 

• 

Do not bend or damage the wires. The wires may be broken and the panel may fall, and injury or property damage may result.

• 

Do not put objects on the panel, or otherwise production malfunctioning may result.

• 

Do not use an unstable stand at the time of operating or maintaining the air conditioner, or otherwise you may topple over 
or injury yourself.

• 

Locate the remote controller in places out of reach of children. The wrong operation of the remote controller may result in injury.

• 

To avoid oxygen depletion, ensure that the room is adequately ventilated if equipment such as a burner is used together 

with the air conditioner.

• 

Before cleaning, be sure to stop unit operation and turn off the circuit breaker. Otherwise, an electric shock and injury may result.

• 

Only connect the air conditioner to the specified power supply circuit. Power supplies other than the one specified may 

result in electric shock, overheating and fires.

• 

Arrange the drain hose to ensure smooth drainage. Imperfect drainage may cause wetting of the building, furniture, etc.

• 

Do not place objects in direct proximity of the outdoor unit and do not let leaves and other debris accumulate around the 

unit. Leaves are a hotbed for small animals which can enter the unit. Once inside the unit, such animals can cause 

malfunctions, smoke or fire if they come into contact with electrical parts.

• 

Do not place objects around the indoor unit.

 

Doing so may have an adverse influence on the performance, product quality, and life of the air conditioner.

• 

This appliance is not intended to be used by persons with reduced physical, sensory or mental capabilities, or with lack of 

operation knowledge, unless they have been given supervision or instruction concerning the appliance use by person 

responsible for their safety. Keep out of children’s reach to ensure that they do not play with the appliance.

Precautions relating to area surrounding the indoor and outdoor units

 

„

Be sure to follow the instructions below.

• 

The indoor unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound).

• 

Refrain from using the units in areas prone to high levels of oily smoke, such as a kitchen. Water leakage may result.

   

   

 

Summary of Contents for FTKM20WVMA

































































































Reviews: