background image

READ BEFORE OPERATION

READ BEFORE OPERATION

Safety Precautions

Read the precautions in this manual 

carefully before operating the unit.

This appliance is filled with R32.

• 

After reading, keep this manual in a convenient place so that you can refer to it whenever necessary. 

If the equipment is transferred to a new user, be sure also to hand over the manual. 

• 

Keep this manual where the operator can easily find them. 

• 

For safety reason the operator must read the following cautions carefully. 

• 

The precautions described herein are classified as WARNING and CAUTION. They both contain 

important information regarding safety. Be sure to observe all precautions without fail.

 WARNING

Failure to follow these instructions properly may result in personal injury or 

loss of life�

 CAUTION

Failure to observe these instructions properly may result in property damage or 

personal injury, which may be serious depending on the circumstances.

Never attempt�

Be sure to follow the instructions.

Be sure to establish an earth connection�

Never wet the air conditioner nor the 

remote controller with water.

Never touch the air conditioner nor the 

remote controller with wet hands.

 WARNING

• 

The appliance must be stored in a room without continuously operating ignition sources (for 

example: open flames, an operating gas appliance or an operating electric heater). 

• Do not pierce or burn� 

• 

Be aware that refrigerants may not contain an odour. 

• 

The appliance must be installed, operated and stored in a room with floor area larger than −* m

2

� 

*  Since the maximum refrigerant charge of the models is below 1.22 kg, it does not have any 

limitation for the minimum floor area.

• 

In order to avoid fire, explosion or injury, do not operate the unit when harmful, among which 

flammable or corrosive gases, are detected near the unit. 

• 

It is not good for health to expose your body to the air flow for a long time. 

• 

Do not place objects, including rods, your fingers, etc., in the air inlet or outlet. Product 

malfunctioning, product or injury damage may result due to contact with the air conditioner’s 

high-speed fan blades�

• Do not attempt to repair, dismantle reinstall or modify the air conditioner yourself as this may result 

in water leakage, electric shocks or fire hazards. 

• 

Do not attempt to install or repair the air conditioner yourself. Improper workmanship may result in 

water leakage, electric shocks or fire hazards. Please contact your local dealer or qualified 

personnel for installation and maintenance work.

• 

Do not use flammable spray near the air conditioner, or otherwise fire may result. 

• 

Do not place flammable items, such as spray cans, within 1 m of the air outlet. 

 

The spray cans may explode as a result of hot air from the indoor or outdoor units� 

• 

When the air conditioner is malfunctioning (giving off a burning odour, etc.) turn off power to the unit and contact your 

local dealer. Continued operation under such circumstances may result in a failure, electric shocks or fire hazards.

• 

Do not use a refrigerant other than the one indicated on the outdoor unit (R32) when installing, moving 

or repairing� Using other refrigerant may cause trouble or damage to the unit, and personal injury� 

• The refrigerant used in the air conditioner is safe� Although leaks should not occur, if for some 

reason any refrigerant happens to leak into the room, make sure it does not come in contact with 

any flame as of gas heaters, kerosene heaters or gas range.

• If the air conditioner is not cooling properly, the refrigerant may be leaking, so call your dealer� When 

carrying out repairs accompanying adding refrigerant, check the content of the repairs with our service staff. 

2

01_EN_3P658678-12V_WEB.indd   2

14-Mar-23   11:29:44 AM

Summary of Contents for FTKF09XV2S





































Reviews: