Daikin FTKF09XV2S, Operation Manual

Page: 19 / 36

OPERATION OPERATION
[Flow of function]
MOLD PROOF setting Stop
Automatic
start every time
To operate automaticall
y
To operate man
uall
y
Set function
during COOL
or DRY
Manual
start one time
Set function
during stop
The heat exchanger is
dried in fan only operation
for about 60 mins.
During this time, the flap
will open and air is emitted.
The heat exchanger is
cleaned in cooling operation
for about 60 mins.
[Note]
During operation, cold air
blows out and the room
temperature may drop.
Automatic
stop
MOLD PROOF setting Stop
After
stop
Immediately
After
stop
MOLD PROOF operation
MOLD PROOF operation
The heat exchanger is
dried in fan only operation
for about 60 mins.
During this time, the flap
will open and air is emitted.
Automatic
stop
NOTE
„ Notes on MOLD PROOF setting
• The air conditioner is operating in MOLD PROOF mode�
When you want to stop MOLD PROOF operation midway, press �
The MOLD PROOF operation will be canceled, and “ ” disappears from the LCD�
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER.
„
Notes on MOLD PROOF operation
• After COOL or DRY operation stops, the air conditioner starts MOLD PROOF operation automatically,
and then stops automatically 1 hour later�
• MOLD PROOF operation may not be performed if the COOL and DRY operation less than 5 minutes
(from turn on remote controller).
In some case you should wait for about 3 minutes more (see Troubleshooting
Page 25
for details.).
• This function is not designed to remove existing dust or mold�
17
01_EN_3P658678-12V_WEB.indd 17 14-Mar-23 11:30:01 AM