background image

 

Algorithm & Control

20

2.7 Sleep Mode

SLEEP Mode can be activated through the remote controller to keep the thermal comfort while sleeping.

SLEEP Mode continues operation at the target temperature for the first hour, then automatically raises the target 

temperature slightly in case of cooling, or lowers it slightly in case of heating. This prevents excessive cooling in 

summer and excessive heating in winter to ensure comfortable sleeping conditions, and also saves electricity.

ON signal of sleep operation

ON signal of sleep opoperation ON signal

OFF signal of sleep operation

operation OFF signal

run

sleep operation

1hr

1hr

(shift 0.5°C/0.9°F)

(shift 1.0°C/1.8°F)

target temperature

<COOL or DRY>

target temperature

<HEAT>

(no offset on target 

temperature)

(shift 1.0°C/1.8°F)

(shift 1.0°C/1.8°F)

2.8 Quiet function

•     Press          for quiet operation (for FTK(X)B-AX models) or          (for FTK(X)N-AX models)  for quiet operation

•     Fan speed turns to minimum speed.

•     Press again to deactivate the function.

•     Available in HEAT and COOL modes only.
•     Any change of fan speed will deactivate this function. 

2.9 ECO+ function (Applicable for FTK(X)B-AX  models)

•     Press          for eco-friendly mode cooling or heating operation.

•     Set temperature automatically adjusts to eco-friendly level.

•     Press again to deactivate the function.

•     Available in HEAT and COOL modes only.

Cool mode

Heat mode

User set 

temperature < 

24°C (75°F)

Unit runs at 24°C (75°F)

24

 

ECO+

 

activated 

User set 

temp

 

Unit runs at (user set temperature - 1°C/2°F)

24

 

ECO+

 

activated

 

User 

set temp 

(User set temp - 1

0

C/2

0

F) 

User set 

temperature = 

24°C (75°F)

Unit runs at 24°C (75°F)

Unit runs at 24°C (75°F)

User set 

temperature > 

24°C (75°F)

Unit runs at (user set tempe 1°C/2°F)

24 

ECO+

 

activated 

User 

set temp 

(User set temp +

 1

C/2

°

F)

 

Unit runs at 24°C (75°F)

24 

ECO+ activated 

User 

set temp 

Summary of Contents for FTKB09AXVJU





















































































Reviews: