Instruction
Si04-115
44
System Configuration
4
ON
OFF
Air purifying filter
Front grille
Indicator lamps
Grille tab
Intelligent Eye lamp (green)
Operation lamp (green)
Air purifying filters are
attached to the inside of
the air filters.
Flap (horizontal blade)
(See page 50 “Adjusting
the Air Flow Direction”.)
TIMER lamp (orange)
(See page 48.)
(See page 51 “Timer Operation”.)
(See page 53 “Intelligent Eye”.)
The louvre is inside of the air
outlet.
(See page 50 “Adjusting the
Air Flow Direction”.)
Air outlet
Louvre (vertical blades)
ON/OFF button
Air inlet
Indoor unit
Names of Parts
Receiver explanation
Room temperature sensor:
•
It senses the air temperature around the
unit.
FTK
FTX
Mode
COOL
AUTO
Air flow rate
AUTO
AUTO
Temperature setting
22˚C
25˚C
•
The operation mode refers to the following table.
•
Push this button once to start operation. Push once again to stop it.
•
This button is useful when the remote controller is missing.
ON/OFF button
•
It receives signals from the remote
controller.
•
When the unit receives a signal, you will
hear a short beep.
Receiver:
•
In the case of multi system operation, there are times when the unit
does not activate with this button. (See page 48.)
Intelligent Eye:
•
It detects the movements of people and
automatically switches between normal
operation and save operation.
(See page 53.)
CAUTION
Before opening the front grille, be sure to
stop the operation and turn the breaker
OFF. If the power is on, the fan may rotate
inside and may cause injury.
(R1926)
