Si04-115
General Functionality
Main Function
25
1.6
Wide-angle Flaps, Diffuser, Louveres and Autoswing
Outline of the
action
It can be commanded for J type by means of a user setting to select either any one desired
position among the five-step directions of air flow adjusted on a remote controller, or Auto-
swing.
Although the liquid crystal display of the five-step directions of the air flow is common for the
modes of Cooling·Dry/Heating as illustrated above, in fact the range of the swing angle is
slightly different in every operation mode.
The position a user set will be selected among the five positions calculated through the
preliminary and evenly divided into four partitions which were taken from the upper and lower
flap angle’s range limits of each mode.
When Auto-swing is chosen, the flap swings in the swing range which meets the operation
mode selected.
Others
"
The vertical louver can be adjusted manually. The movable range is 60 degrees for left or
right, and total 120 degrees.
1
2
3
4
5
Initial
(R1902)
∗
Fan mode is available for the models of cooling-only.
20˚
45˚
Heating mode
0 degree based on
the horizontal line.
(R1903)
0˚
25˚
Cooling /Dry mode
0 degree based on
the horizontal line.
(R1904)
10˚
45˚
0 degree based on
the horizontal line.
Fan mode
(R1905)
